FAMC-GDSE13S-20, Gigabit Fiber Ethernet Media Converter With Duplex SC Fiber Interface SM 40Km
Test requirements and standards
1, Testing of relevant accessories
2, Electrical performance test of power supply system
3, Hot plug performance test
4, High temperature and low temperature test (including power supply, optical transceiver module)
Ethernet interface performance test of fiber media converter
1, Transmission distance test of RJ-45 twisted pair
2, Cross test (NODE/HUB) of RJ-45 twisted pair transmission
3, Transmission impedance matching test of RJ-45 twisted pair
4, Compatibility test of electrical interface (switch, hub, network card)
Fiber interface test
1, Single mode and multi-mode compatible test of fiber optic transceiver;
2, Transmission distance test of optical transceiver;
3, PECL impedance matching test;
4, Optical interface compatibility test (optical switches, fiber hub, fiber network card, fiber media converter).
Voltage and current requirements of power supply system
100M fiber media converter voltage and current is DC5V/550mA, power: 2.75W
Voltage deviation is + 0.03V, and the input voltage is AC110V~260V
10/100M fiber transceiver voltage and current is DC5V/650 mA, power: 3.2w
Voltage deviation is + 0.05V, and the input voltage is AC110V~260V
10M fiber optic converter voltage and current is DC5V/250mA, power: 1.25W
Voltage deviation is + 0.02V, and the input voltage is AC110V~260V
Optical Parameters
| Multimode |
| Fiber |
62.5/125, 50/125,100/140µm |
| Output optical power |
>-18dBm |
| Receiving sensitivity |
<-31dB |
| Distance |
0~2km or 0~5km |
| Connector |
SC, ST, FC |
| Wavelength |
850nm/1300nm/1310nm |
| Single mode |
| Fiber |
9/125,8.3/125,8.7/125or 10/125µm |
| Distance |
0~40km |
| Output optical power |
-11~ -6dBm |
| Receiving sensitivity |
< -34dBm |
| Connector |
SC, ST, FC |
| Wavelength |
1310nm |
Product Tags:
|
|
Gigabit Fiber Ethernet Media Converter , Duplex SC Media Converter 1310nm Images
|
